Brochure: TS_74P.pdf  (825,7 Kb)

Pneumatic heat press with draw system.
Semi automatic press with strong pressure.
Electronic and digital instruments with visual control of temperature and time, advice of eventual errors.
Exchangeable under plate, piece counter, nomex cover.

Dimensions of the plate	74x50 cm
Current	230 V single phase
Power consumption	KW 4,4
Power consumption/h	0,7 KW 7 H
Temperature	40-255° C
Time adjustable	999,9 sec.
Pressure	360 gr/cm2
Net weight	115 kg

Read More »

Pneumatic heat press with double heating plates and moveable heating plate.
electronic and digital instruments with visual control of temperature and time, advice of eventual errors.
Exchangeable under plate.
Possibility to have th acap accessory as extra option.

Dimensions of the plate	50x40 cm
Current	230 V single phase
Power consumption	KW 2,7
Power consumption/h	KW/h 1,0
Temperature	50-255° C
Time adjustable	0-999,9 sec.
Pressure	800 gr/cm2
Net weight	116 kg

Made In Italy

Read More »

Collar & Cuffs Fusing Machine

Sharp International offer premium quality collar & cuff fusing machine collar & cuff fusing machine  is used for garment fusing specially made for small units & tailors. Instead of roller weights this machine is fitted with a lever for required working pressure collar & cuff fusing machine  makes it an ideal choice for light weight machines. Sharp International range has an aluminum plate, collar & cuff fusing machine  acts as a special heater. Further, temperature and pressure can be easily controlled in these machines.

Salient features include:

·      Fitted with electronic control box

·      Lever auctioned for maximum pressure

·      Ideal for tailors and small units

·      Easy to operate

·      Smooth functioning

Sizes	16”x 16”
Heater	2000w
Fusing area	400x400mm
Max. Pressure	4 kg/inch2
Max. Temperature	300oc
Dimensions	3’x 3’x 3’

Read More »

MODEL	HP-450M,MS
POWER SUPPLY	Single phase
RATED OUTPUT	HEATER：4kw
	MOTOR：33W
TEMPERATURE(MAX)	195℃
PRESSURE(MAX)	1.5kg/cm2
BELT SPEED(MAX)	8.7m/min
HEATING TIME	5～20sec
FUSING WIDTH	450mm
DIMENSION	W：1,660mm
	D：880mm
	H：460mm
NET WEIGHT	(approx.) 152kg
FEATURE	Automatic belt warping prevention device. Upper belt warpping prevention system adopt direct limit switch type like lower belt warping prevention system. Increase the fusing belt width for 450mm Adopted rubber driving roller for non-slip driving. MS MODEL has been equipped rotary strip-off device.

Read More »

MODEL  HP-1240MP POWER SUPPLY  Three phase or Single phase RATED OUTPUT  HEATER：3,650W  MOTOR：400W MAX.TEMPERATURE  200℃ MAX.PRESSURE  210g/cm2 DIMENSION OF PLATE  1,200×400mm DIMENSIONS  950(D)×1,226(W)×1,340(H)mm WEIGHT  (approx.) 210kg FEATURES □Motor driven fully-automatic flat type press. □Compact and requires no extra equipment such as an air compressor, and can be installed very easily. □Uses a special heater and the aluminium heater plates give excellent thermal efficiency and uniform temperature 　distribution. □Anti-static type Teflon sheet is used for the upper plate, making it easy to clean. □Although the suction system is automatic, pedal-operation is also possible (when using a tray, pedal-operation 　 can not be used). Electrical contact-pointless components are used to improve the durability of the machine. □The powerful 200w blow motor provides extravacuum sucking power, and the sirocco fan is equipped to reduce noise.Sizes and spacings of the suction holes in the center part and around both ends on the lower plate have seen properly adjusted, to provide uniform sucking power over the entire surface.

Read More »